The best mini PCs for a home server in 2026
If you want one small, quiet box that runs Home Assistant, a stack of Docker containers and a Jellyfin server — without a subscription and without a tower PC humming in the corner — a modern mini PC is the answer. The right one costs less than a tricked-out Raspberry Pi setup, sips power, and transcodes video in hardware. Here is what actually matters, and the two machines we would buy.
Published Nov 18, 2026 · Last updated Nov 18, 2026
Why a mini PC beats a Pi — and an old desktop
The Raspberry Pi earned its place in home labs, but the math has moved. A Pi 5 with a case, a decent power supply, an NVMe hat and an SSD lands within sight of an Intel N100 mini PC — and the mini PC gives you an x86 processor (every Docker image is built for x86 first), proper NVMe storage on a real bus, more RAM, and often a second Ethernet port. Against an old desktop, the mini PC wins on the two things a 24/7 box is judged by: noise and power. A retired gaming PC idling at 60–100 W costs several times more per year to run than a mini PC idling under 10 W, and it sounds like it, too.
What actually matters in the spec sheet
- Intel Quick Sync (N100 / N150). The integrated GPU on Intel's small chips is the single most valuable feature for this job. Jellyfin and Plex transcode video on it almost for free, and Frigate can use the same iGPU for detection via OpenVINO. It is why a modest N100 routinely out-serves a faster CPU with no iGPU. Our Quick Sync transcoding guide shows the setup and the difference it makes.
- Dual network ports. A second NIC sounds like a spec-sheet extra until you want the box to double as a router/firewall (OPNsense in a VM), put your cameras or IoT gear on their own network segment, or simply keep a management interface separate. One port is fine; two is flexibility you cannot add later.
- RAM headroom. Home Assistant alone needs little. Home Assistant plus Immich, Jellyfin, a password manager, a dashboard and a monitoring stack wants 16 GB — and the machine whose RAM is a replaceable stick, not soldered, is the one you will not be replacing in three years.
- Idle power draw. These boxes run 8,760 hours a year. The N100/N150 class idles around 6–10 W; bigger Ryzen chips idle a little higher but still far below any desktop. At these numbers the electricity argument settles itself.
- Storage expansion — the honest limit. Most mini PCs hold exactly one M.2 SSD, some add a 2.5-inch bay. That is plenty for the OS, containers and app data. It is not a media archive: plan on a NAS or external storage for a big library, and treat USB-attached drives as a compromise (see the limits section below).
The two picks
Budget pick: Beelink EQ14 (Intel N100)
The EQ14 is the default recommendation because it nails the brief: an N100 with Quick Sync, 16 GB of RAM, a 500 GB NVMe SSD, dual 2.5 GbE ports (rare at this price), and an internal power supply — no wall-wart brick. It idles around 6 W, runs Home Assistant OS or a Docker host without drama, and hardware-transcodes Jellyfin streams while doing it. Street prices move around, but it currently sells in the $349–399 range after the late-2026 mini-PC price spike — no longer Pi-money, but still cheaper than building an equivalent small desktop, and far thriftier to run.
Step-up pick: Beelink SER5 (AMD Ryzen)
If your plans lean toward virtualization — several VMs, a heavier container stack, compiling, or a small local AI experiment — the SER5's Ryzen 5 chip has roughly three times the CPU muscle of the N100, dual RAM slots (upgradeable to 64 GB), and room for both an NVMe SSD and a 2.5-inch drive. The trade-off is transcoding: AMD's iGPU works with Jellyfin via VA-API, but Quick Sync is the smoother, better-supported path, and the SER5 has a single network port. Buy it for CPU, not for media.
| Beelink EQ14 | Beelink SER5 | |
|---|---|---|
| CPU | Intel N100 (4 cores) | AMD Ryzen 5 (6 cores) |
| Transcoding | Quick Sync — excellent | VA-API — workable |
| RAM | 16 GB (1 slot) | 16 GB (2 slots, up to 64 GB) |
| Storage | 1× M.2 NVMe | 1× M.2 NVMe + 1× 2.5″ bay |
| Network | 2× 2.5 GbE | 1× 1 GbE |
| Idle power | ~6 W | ~8–10 W |
| Typical price | ~$349–399 | ~$389–429 |
| Best for | HA + Docker + Jellyfin, most homes | VMs and CPU-heavy stacks |
Gear for this build
Prices are editorial and change often; buttons show live prices. Some links may earn a commission at no cost to you — see the disclosure page.
What to run on it
Two sensible shapes. Home Assistant OS in a VM (on Proxmox) keeps HA fully featured — add-ons, supervised updates — while the same box runs everything else in containers or a second VM beside it; this is the flexible option and the one we suggest if you will grow. Home Assistant Container in Docker, alongside your other services in Compose, is simpler and perfectly good if you do not use add-ons. Either way, pass the iGPU through to Jellyfin so Quick Sync is available — on a Docker host that is a two-line device mapping:
services:
jellyfin:
image: jellyfin/jellyfin
devices:
- /dev/dri:/dev/dri # Intel Quick Sync lives here
New to Compose? Our Docker Compose basics guide walks the whole pattern — folders, stacks, updates — and everything in it applies to a mini PC exactly as it does to a NAS.
Buying one box to do everything? Get the EQ14, install Proxmox, run Home Assistant OS in one VM and a Docker VM beside it. You get add-ons, clean backups of each guest, and a machine that is still idling under 10 W — the full homelab starter kit in a box the size of a paperback.
The honest limits
- No ECC memory. Consumer mini PCs use standard RAM. For home services this is a theoretical risk rather than a practical one, but it is a real difference from 'proper' server hardware — keep backups regardless.
- One internal drive. A single SSD is a single point of failure. Back the box up (both picks are easy to image at the VM level) and keep bulk media somewhere with its own copy.
- USB storage caveats. A USB hard drive works for media overflow, but USB enclosures can sleep, disconnect under load, and hide SMART data. Fine for a Jellyfin library; a poor home for your only photo archive.
- Thermals and noise. These are actively cooled with small fans. In a living room they are effectively silent at idle; wedged in a sealed cabinet under transcoding load, they will get warm and audible. Give them air.
Official documentation and references
- Intel ARK — Processor N100 specifications (Intel's official specs: 4 cores, 6 W, Quick Sync; Intel blocks automated link checkers, verified via search)
- Home Assistant — installation options, including generic x86-64 hardware
- Jellyfin documentation — hardware acceleration (Intel Quick Sync, VA-API)
- Beelink — official mini PC range and specifications
Frequently asked questions
Is an Intel N100 enough for Home Assistant and Jellyfin at the same time?
Yes, comfortably. Home Assistant itself is light, and Jellyfin's heavy lifting — transcoding — runs on the N100's Quick Sync hardware rather than the CPU cores. An N100 box can run Home Assistant, a typical stack of Docker containers and hardware-transcoded streams concurrently; what it will not do well is CPU-only transcoding or several busy virtual machines at once.
Mini PC or Raspberry Pi 5 for a home server?
The mini PC, for most people. By the time a Pi 5 has a case, power supply, storage hat and an SSD, it costs about what an N100 mini PC does — and the mini PC brings an x86 CPU (every Docker image just works), Quick Sync transcoding, real NVMe storage and usually a second network port. The Pi still wins on GPIO pins and sheer tiny-ness.
How much RAM does a home server mini PC need?
16 GB is the sweet spot: enough for Home Assistant plus a dozen containers, or a small virtualization host with two or three guests. 8 GB works for Home Assistant OS alone but leaves no headroom. If you plan to run Frigate with several cameras or a local LLM experiment later, buy the model whose RAM can be upgraded.
Can a mini PC replace my NAS?
It can replace the NAS's services — media, photos, files, backups — but not its storage. Most mini PCs hold one internal SSD and have no room for multiple 3.5-inch drives, so bulk storage still belongs on a NAS, a DAS enclosure, or a single large internal drive with a proper backup elsewhere. Plenty of homes run 'mini PC for compute, NAS for disks' and it is a genuinely good split.
How much does it cost to run a mini PC 24/7?
An N100-class box idles around 6–10 W. At 8 W average that is roughly 70 kWh a year — on the order of $10–15 annually at typical US residential rates. An old desktop idling at 60–100 W costs several times that, which is why 'free' recycled hardware is often the expensive option.

