The switch with no battery and no wires: Zigbee Green Power
Press a Green Power switch and the click itself generates the energy to send its Zigbee message — no battery to die, no wire to run, mountable on glass, brick, or the side of a bookshelf. Home Assistant 2026.11 added support for these kinetic switches (the Friends of Hue family is the famous one). This is the small, delightful chapter: how they work, what HA does with them, and where they beat every other switch type.
Published Nov 18, 2026
The trick, explained
Inside a Green Power switch is a tiny electromechanical harvester: the physical travel of the button generates just enough electricity to transmit a short Zigbee Green Power frame. That is the whole magic — the switch is powered by the act of pressing it, which means it works forever with zero maintenance and mounts anywhere with adhesive. The trade is baked into the physics: the message is a one-way shout ('button 3 pressed!'), with no state, no LED feedback, and no receiving — these are pure input devices, and brilliant ones.
What Home Assistant 2026.11 does with them
Green Power devices join through a nearby mains-powered Zigbee device acting as a proxy (the frame hops into your regular mesh — your existing network of bulbs and plugs is the infrastructure). With 2026.11's support, presses arrive in Home Assistant as events you bind to automations: this button toggles the reading lamp, that one runs the goodnight scene, a long-press dims. Pairing follows the Green Power commissioning flow (a sequence involving the switch and a nearby proxy device) — consult your switch's instructions alongside HA's; it is a two-minute ritual once you have done one. Our Zigbee stack guide covers the network these join.
Where they win
- Impossible locations: the bedside table side, the glass door, the rented wall you cannot open, the outdoor gate post — anywhere wires and battery swaps are non-starters.
- Scene control at the architecture's odd spots: a 4-button kinetic switch by the couch runs the evening's lighting scenes without a phone in sight — the guest-friendly interface smart homes keep promising.
- Zero-maintenance fleet: every battery switch in a house is a future chore with a date you do not know. Green Power deletes the category.
- Supplementing real switches: keep proper in-wall switches for the circuits (our switches chapter) and add kinetic switches as extra control points where people actually stand.
The honest limits
- One-way only: no status light, no confirmation — the automation's effect IS the feedback. Design scenes that visibly respond.
- Click feel: kinetic switches have a distinctive, firmer click. Some people love the tactility; some find it cheap. Buy one before buying eight.
- Proxy dependency: a Green Power switch needs a compatible mains-powered Zigbee device within range to relay it — sparse networks need a plug or bulb placed as the bridge.
- Catalog size: the Friends of Hue ecosystem and a handful of others — this is a curated shelf, not a sprawling market. Check HA's supported list for your region's models.
A starter project
Buy one 4-button switch. Commission it near a strong mesh point. Bind the buttons to four scenes in one room (bright / evening / movie / off) and live with it for two weeks where your hand actually falls — bedside or couch-side. If your household reaches for it instead of phones, you have found the interface your house was missing, and the rest of the rollout plans itself.
Official documentation and references
- Connectivity Standards Alliance — Zigbee and the Green Power specification
- Zigbee2MQTT — the supported-devices database, including Green Power switches
- Home Assistant — the ZHA integration and its device support
Frequently asked questions
Do Green Power switches really never need batteries?
Correct — they harvest the energy of the button press itself to transmit. There is no battery to replace and no charging; the trade-off is one-way communication only.
Do they work with ZHA and Zigbee2MQTT?
Home Assistant 2026.11 added Green Power support on the ZHA side; the devices join via a mains-powered proxy device on your mesh. Check the current support notes for your stack and switch model before buying a fleet.
Where should I put the first one?
Where hands already look for control and wiring is impossible: bedside, couch-side, or by a door that lacks a switch. Bind it to scenes, not single lights — scenes are where a 4-button kinetic switch shines.

