Adaptive Lighting: lights that follow the sun
Left alone, smart bulbs are dumb about the one thing light is for: matching the time of day. Adaptive Lighting is a Home Assistant integration that continuously tunes your lights' brightness and color temperature to the sun's position — energizing light while you work, warm dim light as the evening lands — and then gets out of the way when you grab a switch yourself. It is the highest comfort-per-effort upgrade in the whole platform.
Published Nov 17, 2026
What it does, concretely
You point Adaptive Lighting at a set of lights and it creates a small family of switches for them. The main switch turns adaptation on; separate switches govern brightness-only and color-only adaptation, plus a sleep mode that drops everything to a warm, dim floor for late night. Through the day it interpolates between your settings: at solar noon, bright and neutral-white; approaching sunset, progressively warmer and dimmer; at your configured night point, the sleep profile if it is on. The changes are slow enough to be invisible — you notice the effect (the room always feels right) rather than the mechanism.
Install and first setup
- Install the integration: in the add-on/integration store (HACS, now folded into Home Assistant's built-in Marketplace) search Adaptive Lighting and install, then restart Home Assistant.
- Settings → Devices & Services → Add Integration → Adaptive Lighting. Give this configuration a name by area — 'Downstairs', 'Bedrooms' — because you will want different behavior per zone, and multiple configurations are the norm, not the exception.
- Pick the lights for this configuration. Prefer whole rooms or Zigbee groups over individual bulbs where you can: fewer entities, smoother fades, less chatter on the mesh.
- Accept the defaults for the first day. The stock curve is well-judged; every knob below exists because someone's house differs, not because the defaults are wrong.
The settings worth knowing
- Interval (default 90s): how often it re-asserts the curve. Longer is gentler on a busy Zigbee mesh; shorter reacts faster when a light is turned on mid-evening.
- Transition: how slowly changes fade. Long transitions (30–60s+) make adaptation truly invisible.
- Take over control: the diplomatic setting. When you manually change a light's brightness or color, Adaptive Lighting notices and stops fighting you until the light is turned off and on again. Leave this ON — an integration that wrestles the household for the dimmer loses, permanently, the first time it annoys someone at dinner.
- Adapt only when on / adapt on turn-on: ensure a light switched on at 11 p.m. comes up warm and dim immediately, not at yesterday's noon settings with a slow fade.
- Sleep mode: schedule it (a time-based automation toggling the sleep switch is the common pattern) rather than treating it as a manual switch, and it becomes the house's circadian nightcap.
Start with one room. The living room proves the concept in an evening. Bedrooms are the second install — waking to light that is already bright and cool, instead of a bulb's default blast, is the feature people write posts about.
Troubleshooting
- Lights flash or jump when turned on: the bulb's power-on default differs from the adapted state. Enable adapt-on-turn-on with a short initial transition, and set bulbs' power-on behavior to 'previous' where the option exists.
- It keeps overriding my manual changes: take-over control is off, or the manual change was made through an app the integration cannot see. Turn take-over on and make peace.
- Colors look wrong on some bulbs: cheap bulbs have narrow color-temperature ranges; Adaptive Lighting clamps to what each light reports it can do. Mixed bulb models in one room will match approximately, not perfectly — a hardware truth, not a bug.
- Nothing adapts: check the configuration's switch is on and that no second configuration also claims the same lights — overlapping configs fight, quietly and forever.
Pairing it with real switches
Adaptive Lighting reaches its final form when the wall controls stop being bulb-killers. A smart switch or dimmer that cuts power still defeats any bulb intelligence — the bulb cannot adapt while it is off at the wall — so the classic pairing is a smart dimmer in 'smart bulb mode' (constant power, the paddle sends commands instead) or simply smart bulbs on circuits the household leaves powered, controlled by wireless remotes and automations. The Zooz dimmer in the gear list is the kind of switch this site's build uses elsewhere in the house; for bulb circuits, look for switches with a documented smart-bulb mode. Get that pairing right and the experience becomes invisible in the best way: the paddle works like it always has, the light it produces is simply always the right light. That invisibility is the actual product — circadian lighting nobody has to think about, explain to guests, or forgive.
Gear for this build
Prices are editorial and change often; buttons show live prices. Some links may earn a commission at no cost to you — see the disclosure page.
Official documentation and references
- Adaptive Lighting on GitHub — installation, configuration options and examples
- Home Assistant — Light integration documentation
- Home Assistant — Sun integration, the position data Adaptive Lighting follows
Frequently asked questions
Does Adaptive Lighting work with any smart bulb?
Any light Home Assistant can set brightness and color temperature on — Zigbee, Z-Wave, Wi-Fi, Matter. Brightness-only bulbs get brightness adaptation; the integration adapts what each light supports.
Will it fight my automations?
It coexists well if you let take-over control do its job and avoid other automations setting the same lights' color temperature on a schedule. Two systems steering color is one too many; Adaptive Lighting should own that job alone.
Does it need the cloud or a subscription?
No — it is a local integration computing the sun's position from your location. It is also free and open source, like most of the ecosystem this site recommends.

