Zigbee channel planner
Zigbee dropouts are very often just a channel fight: your Zigbee network shouting across a Wi-Fi channel. Tell the planner which 2.4 GHz Wi-Fi channels your house uses and it will show you — on the actual spectrum — which Zigbee channels are clear, which are contested, and which to avoid.
Mesh systems usually sit on 1, 6 and 11 — that is the preset loaded. A single router is typically on one of them; check its app if you are not sure. Neighbors count too: if a neighbor's network is loud in your house, add its channel as another access point.
How to read the chart
The amber humps are your Wi-Fi channels — each one is a 20 MHz-wide footprint (40 if you selected it) in the 2.4 GHz band. The bars along the bottom are the sixteen Zigbee channels, 11 through 26, each only about 2 MHz wide. Green means the Zigbee channel sits in genuinely open spectrum; amber means it grazes a Wi-Fi footprint's edge, where it will work but retries rise; red means it lives inside a Wi-Fi channel, which is where dropouts, lag and chewed batteries come from. Distance is everything — and notice that the Wi-Fi channels you don't use are exactly where your best Zigbee channels hide.
Changing the channel, once you have picked one
In ZHA: Settings → Devices & Services → your ZHA integration → Configure — the channel can be changed there; ZHA warns that some devices may need attention afterwards, which matches reality. In Zigbee2MQTT: set advanced: channel in configuration.yaml and restart; the frontend's settings page exposes the same option. Either way: change it once, then give the mesh a few hours to settle before judging. Mains-powered routers migrate first; wake sleepy battery sensors with a button press near a router the next day, and re-pair only the stubborn remainder. If you are still choosing a stack, the Zigbee2MQTT vs ZHA guide covers how channel handling differs.
Frequently asked questions
What is the best Zigbee channel?
With the typical Wi-Fi setup on channels 1, 6 and 11, Zigbee channels 15, 20 and 25 sit in the gaps and are the standard recommendation — the planner above shows why, for your exact Wi-Fi channels. There is no universally best channel: it depends entirely on the Wi-Fi around you, including your neighbors'.
Why do Zigbee and Wi-Fi interfere at all?
Both live in the 2.4 GHz band. A Wi-Fi channel is about 20 MHz wide; a Zigbee channel is about 2 MHz wide and there are sixteen of them (11–26) squeezed across the same spectrum. A Zigbee channel that lands inside a busy Wi-Fi channel's footprint gets shouted over — the symptoms are dropouts, slow responses and battery drain from retries.
If I change my Zigbee channel, do I have to re-pair everything?
Usually not everything. Mains-powered devices typically find the new channel on their own within an hour or so. Some sleepy battery sensors need to be woken (a button press) near a router, and a stubborn few need re-pairing. Change the channel once, deliberately, using a tool like this — not by trial and error.
Related guides
- Fix a flaky Zigbee network — the full diagnosis when channels are only part of the story.
- Zigbee2MQTT vs ZHA — pick the stack before you pick its channel.
- Radios & protocols — where Zigbee fits among Thread, Z-Wave and Bluetooth.
- NVR storage calculator — the other planner on this site.

